How to Fix OE Error on LG Washing Machine

Error codes in washing machines are safety management designs aimed at preventing complicated breakdown and impairment of your device. Various errors reflect different types of glitches in your device requiring attention. Modern washers are designed with sensor systems to check lapses and dysfunctions in your device. 

LG Washing Machines parades high-tech and state-of-the-art features to spot errors in your washing machine. These errors are always displayed as a code in your device to notify you of any faulty or compromised component of the device.

What is OE Error Code on Your LG Washing Machine?

OE Error Code LG Washer

OE error code flashes in your device when the drainage system is compromised. A typical and more handy observation when an OE error flashes is that your device begins to accumulate foam and froth in the wash cycle without draining them out.

Simply put, the OE error means that your device is not draining. Several factors can be responsible for a dysfunctional draining system in your device, making the OE error flash. To prevent or fix OE errors from flashing in your washer, first-hand knowledge of factors that can cause it to flash is necessary.

Causes Of OE Error on Your LG Washing Machine 

OE error code checks on your device draining system. Several factors can put your device at risk of disrupting the draining mechanism and making the OE error code flash. 


If clogs accumulate in your LG Washing machine, it will block the drainage system making the OE error code flash. Clogs accumulate from dirt, gunks, grease, and other heavy, sticky substances. It can prevent your device from draining, making the OE error flash.

Bad Positioning

How you place and position your washer matters. When skewed or slanting to one side, it may not drain, causing the OE error to flash. Let your LG Washer stand straight. Tie the nuts and bolts. Ensure it is firmly fixed.

Overloading And Unbalanced Load

Heavy clothes forced into the washtub will put intense pressure on your LG washing machine, making it unable to drain. OE error will flash when your device is overloaded and filled with loads of disproportionate sizes.

Detergents Residue

Detergents and cleaning solutions used during the laundry process affect the drainage system when it is over concentrated. Most settle as residues and grow after the wash cycle creating complications for the drainage system. 

Uncleared Lint

Pieces and remains of some clothes which hang up in the drum or any other part of the machine can affect the drainage of your device. When lint is uncleared over time in your device, it can compromise the drainage system, making the OE error flash.

Kinked And Blocked Drain Hose

The drain hose is an essential component of all washing devices, irrespective of the brand. When it is blocked or kinked, the OE error will likely flash. The drain hose channels wastewater from your LG Washing machine straight to the sewage. When it is not functioning, your device recycles wastewater, dampens cloth and disrupts the function of the device.

Impaired Pump

The Pump is an integral component of your LG washing machine. It pumps and distributes water to the various components of the machine, including to the drain hose, where wastewater is emptied from the device. If your pump is not functioning, the OE error code will flash because your device may not drain.

How To Prevent OE Error on Your LG Washing Machine

Preventing the OE error display in your LG washing machine is similar to keeping your device’s draining system in top shape. OE error is intertwined with your device’s draining system. Below are steps to help prevent OE errors in your LG Washing Machine.

Clear Lint And Clogs In Your LG Washing Machine

Lint and clogs are the most typical barriers to your LG Washer Drain. Modern LG washers are equipped with filters to collect lint after every wash cycle. The lint is always gathered in the filter. Frequently check, clear, and clean this filter to avoid blockages.

Clogs are forms of blockages to your device. Clogs are built from settling dirt of heavy substances, grease, gunks, grime, and other device-unfriendly substances that may stick to your cloth when putting them into the washer—clean and clear clogs to avoid OE errors.

Firmly Fix Your LG Washing Machine

If you don’t want your LG washing Machine to flash the OE error and disrupt operations, ensure that the device is firmly fixed to its stand. Tighten all nuts and bolts. Don’t keep your washer on the tiled and slippery floors. It may shake and vibrate, affecting the drainage while working.

Use Balanced And Optimal Load

Don’t overload your LG Washer. If you are using heavy clothes, the quantity should be minimized so as not to put unnecessary pressure on the device.

Clear Clogs And Dirt.

Always ensure that you clean and clear all clogs and blockages. They build and develop over time from grime, dirt, guns, and other stubborn stains. Thoroughly clean all dirt, grime, and gunks after laundry to protect the drainage system.

Check and Clear The Lint Filter

After each wash cycle, the lint of clothes may gather and be trapped by the lint filter. If it is not cleared and cleaned regularly, it may constitute a blockage to your LG washer drain.

Check Your Pump And Drain Hose

A faulty pump or blocked drain hose will affect your drainage. Check them regularly. Replace faulty pumps and straighten kinked drain hose to prevent OE error from disrupting the wash cycle.

Use Recommended Detergents And Cleaning Solutions

Concentrated detergents are dangerous to your LG washer drain. They do not readily dissolve and may settle as residues dragging the device’s performance. Clean all detergent residues and only use LG-recommended detergents. This decreases the likelihood of the OE error flashing.

How To Fix OE Error On Your LG Washing Machine

Apart from taking the above preventive measures to avoid the OE error, if the device shows the error and suddenly stops working, what will you do? Below are definite steps you can take to fix OE errors in your LG Washing Machine.

Unplug From Power To Reset The Washer

Minor fixes such as a few minutes of disconnecting your device from power can fix the LG Washer OE error. Disconnection from power is always applicable when the OE error emanates from faults in the control panel. Disconnecting from power returns the control board to normal, and the OE error will disappear. 

NOTE: An OE error in your device that is not attended to may cause other severe damage to your device. Be prompt to resolve OE errors in your device. When it persists, contact a technician.

Clear The Filter Of The Pump

Pump filters collect and trap lint, debris, and undissolved lumps of dirt. If you are using the front loader, it is always located in the front of the device. Locate it clean and clear thoroughly. Regular cleaning will help your device drain smoothly, clearing any OE error.

NOTE: Before attempting to clean the pump filter, switch off your device and disconnect it from power.

Straighten And Install Your Drain Hose Properly

A kinked, twisted, and obstructed drain hose leads to an OE error in your LG Washing Machine. A quick fix to your OE error is straightening those kinks and ensuring that it is installed properly.

Run A Test On Your Drain Pump

A faulty drain pump could be responsible for the flashed OE error in your washing machine. Press and hold the spin button until it shows HIGH. Then press START. It will start the spin cycle with low noise. The noIse indicates that your device pump is functioning. Conducting a test on your drain pump helps you to know where to focus when trying to fix OE errors.

Tips On How To Care For Your LG Washing Machine

  • Clean your device thoroughly. Clear clogs, dirt, grime, gunks, and other heavy and stubborn stains.
  • Use optimal load. Don’t overload your device.
  • Use moderately concentrated detergents recommended by the brand. Avoid highly concentrated detergents.
  • Promptly attend to all errors in your device to avert more severe damage.
  • Frequently check the drain hose, drain pump, control board, and other sensitive components for wear, tear, or impairment.
  • Clean your pump filters thoroughly and regularly.
  • Straighten the Kinked drain hose and remove all blockages.
  • Consult your technician when the damage or impairment is more technical.

Leave a comment